The MPLS WG Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] [mpls] Layer 2: Vlanid as labels
Hi Peter, You need to refer to the discussions in the CCAMP and GELS context. On 17th July 2006 I sent mail to CCAMP and GELS to set out the framework for answering your question. (https://ops.ietf.org/lists/ccamp/ccamp.2006/msg00489.html) The bottom line is: > Ensure that the data plane you wish to control is approved > and documented by an SDO with responsibility for Ethernet > (e.g. IEEE). And this is safeguarded by: > If you feel the need to explain > your data plane in your I-D, then there is probably something > wrong with the specification in the other SDO and: > When it is clear that protocol work is progressing, > Deborah and I will liaise with the other SDO to get their > blessing for using a control plane for the nominated data > plane. Lastly (and the MPLS co-chairs may want to jump in here) we designated the GELS mailing list as the place to discuss Ethernet data planes to avoid cluttering the mailing lists of working groups that have their own work to do. Cheers, Adrian ----- Original Message ----- From: "Peter Tomsu" <ptomsu@cisco.com> To: "Adrian Farrel" <adrian@olddog.co.uk> Cc: <saquibk@huawei.com>; <mpls@ietf.org> Sent: Monday, February 26, 2007 1:49 PM Subject: Re: [mpls] Layer 2: Vlanid as labels > Adrian, > > so what do you call the real IEEE data plane then? > > Cheers > > Peter > > > On 19.02.2007, at 13:50, Adrian Farrel wrote: > >> Hi Saquib, >> >> The place for the discussion of this subject is the GELS (GMPLS >> Ethernet Label Switching) mailing list. Subscribe at https:// >> rtg.ietf.org/mailman/listinfo/gels >> >> Several discussions are progressing (and you may see several >> individual submission I-Ds) relating to what should be used as a >> label and what a legitimate data plane is. We need to be careful >> that we only support label switching of a real, IEEE data plane. >> >> Thanks, >> Adrian >> ----- Original Message ----- From: "saquib khan" <saquibk@huawei.com> >> To: <mpls@ietf.org> >> Sent: Monday, February 19, 2007 8:53 AM >> Subject: [mpls] Layer 2: Vlanid as labels >> >> >>> >>> >>> Hi all, >>> >>> Can't we use vlanid in place of labels for MPLS . >>> >>> Regards, >>> >>> Saquib >> >> >> >> _______________________________________________ >> mpls mailing list >> mpls@lists.ietf.org >> https://www1.ietf.org/mailman/listinfo/mpls > > _______________________________________________ mpls mailing list mpls@lists.ietf.org https://www1.ietf.org/mailman/listinfo/mpls
|
|