The MPLS WG Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] [mpls] I-D ACTION:draft-ietf-mpls-p2mp-sig-requirement-01.txt
A New Internet-Draft is available from the on-line Internet-Drafts directories. This draft is a work item of the Multiprotocol Label Switching Working Group of the IETF. Title : Signaling Requirements for Point to Multipoint Traffic Engineered MPLS LSPs Author(s) : S. Yasukawa Filename : draft-ietf-mpls-p2mp-sig-requirement-01.txt Pages : 29 Date : 2005-2-18 This document presents a set of requirements for the establishment and maintenance of Point-to-Multipoint (P2MP) Traffic Engineered (TE) Multiprotocol Label Switching (MPLS) Label Switched Paths (LSPs). There is no intent to specify solution specific details nor application specific requirements in this document. It is intended that the requirements presented in this document are not limited to the requirements of packet switched networks, but also encompass the requirements of L2SC, TDM, lambda and port switching networks managed by Generalized MPLS (GMPLS) protocols. Protocol solutions developed to meet the requirements set out in this document must attempt to be equally applicable to MPLS and GMPLS. A URL for this Internet-Draft is: http://www.ietf.org/internet-drafts/draft-ietf-mpls-p2mp-sig-requirement-01.txt To remove yourself from the I-D Announcement list, send a message to i-d-announce-request@ietf.org with the word unsubscribe in the body of the message. You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce to change your subscription settings. Internet-Drafts are also available by anonymous FTP. Login with the username "anonymous" and a password of your e-mail address. After logging in, type "cd internet-drafts" and then "get draft-ietf-mpls-p2mp-sig-requirement-01.txt". A list of Internet-Drafts directories can be found in http://www.ietf.org/shadow.html or ftp://ftp.ietf.org/ietf/1shadow-sites.txt Internet-Drafts can also be obtained by e-mail. Send a message to: mailserv@ietf.org. In the body type: "FILE /internet-drafts/draft-ietf-mpls-p2mp-sig-requirement-01.txt". NOTE: The mail server at ietf.org can return the document in MIME-encoded form by using the "mpack" utility. To use this feature, insert the command "ENCODING mime" before the "FILE" command. To decode the response(s), you will need "munpack" or a MIME-compliant mail reader. Different MIME-compliant mail readers exhibit different behavior, especially when dealing with "multipart" MIME messages (i.e. documents which have been split up into multiple messages), so check your local documentation on how to manipulate these messages. Below is the data which will enable a MIME compliant mail reader implementation to automatically retrieve the ASCII version of the Internet-Draft. <<< multipart/alternative: No recognizable part >>> _______________________________________________ mpls mailing list mpls@lists.ietf.org https://www1.ietf.org/mailman/listinfo/mpls |
|