The MPLS WG Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] [mpls] I-D ACTION:draft-ietf-mpls-rfc3036bis-00.txt
A New Internet-Draft is available from the on-line Internet-Drafts directories. This draft is a work item of the Multiprotocol Label Switching Working Group of the IETF. Title : LDP Specification Author(s) : L. Andersson, et al. Filename : draft-ietf-mpls-rfc3036bis-00.txt Pages : 162 Date : 2004-10-12 The architecture for Multi Protocol Label Switching (MPLS) is described in RFC 3031. A fundamental concept in MPLS is that two Label Switching Routers (LSRs) must agree on the meaning of the labels used to forward traffic between and through them. This common understanding is achieved by using a set of procedures, called a label distribution protocol, by which one LSR informs another of label bindings it has made. This document defines a set of such procedures called LDP (for Label Distribution Protocol) by which LSRs distribute labels to support MPLS forwarding along normally routed paths. A URL for this Internet-Draft is: http://www.ietf.org/internet-drafts/draft-ietf-mpls-rfc3036bis-00.txt To remove yourself from the I-D Announcement list, send a message to i-d-announce-request@ietf.org with the word unsubscribe in the body of the message. You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce to change your subscription settings. Internet-Drafts are also available by anonymous FTP. Login with the username "anonymous" and a password of your e-mail address. After logging in, type "cd internet-drafts" and then "get draft-ietf-mpls-rfc3036bis-00.txt". A list of Internet-Drafts directories can be found in http://www.ietf.org/shadow.html or ftp://ftp.ietf.org/ietf/1shadow-sites.txt Internet-Drafts can also be obtained by e-mail. Send a message to: mailserv@ietf.org. In the body type: "FILE /internet-drafts/draft-ietf-mpls-rfc3036bis-00.txt". NOTE: The mail server at ietf.org can return the document in MIME-encoded form by using the "mpack" utility. To use this feature, insert the command "ENCODING mime" before the "FILE" command. To decode the response(s), you will need "munpack" or a MIME-compliant mail reader. Different MIME-compliant mail readers exhibit different behavior, especially when dealing with "multipart" MIME messages (i.e. documents which have been split up into multiple messages), so check your local documentation on how to manipulate these messages. Below is the data which will enable a MIME compliant mail reader implementation to automatically retrieve the ASCII version of the Internet-Draft. <<< multipart/alternative: No recognizable part >>> _______________________________________________ mpls mailing list mpls@lists.ietf.org https://www1.ietf.org/mailman/listinfo/mpls |
|