The MPLS WG Archive
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index][Thread Index][Author Index][Subject Index]
[mpls] Re: mpls post from shreyas@stealth.net requires approval
-
From: Eric W Gray <ewgray2k@netscape.net>
-
Date: Thu, 11 Nov 2004 08:28:04 -0500
-
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;rv:1.7.2) Gecko/20040804 Netscape/7.2 (ax)
-
X-AOL-IP: 12.150.188.130
Title:
Forwarded on behalf of Shreyas Pandit.
What Cisco Series Routers/Switches is PWE3 supported on?
At 01:13 PM 11/10/2004, you wrote:
Cisco offers PWE3 services using either
L2TPv3 or MPLS (aka AToM).
L2TPv3 is used for networks with no MPLS or non-contiguous MPLS clouds.
AToM is used on contiguous MPLS clouds. Pseudowire support for FR,
Ethernet, HDLC, PPP, ATM, VLAN, etc. Take your pick.
Scott Wainner
Distinguished Systems Engineer
Cisco Systems
Mobile and Inter-Exchange Carrier Sales
(703) 484-5820
SP wrote:
does anyone know of any equipment that
implements this technology?
http://www.ietf.org/html.charters/pwe3-charter.html
_______________________________________________
mpls mailing list
mpls@lists.ietf.org
https://www1.ietf.org/mailman/listinfo/mpls
If you reply to this message, keeping the Subject: header intact,
Mailman will discard the held message. Do this if the message is
spam. If you reply to this message and include an Approved: header
with the list password in it, the message will be approved for posting
to the list. The Approved: header can also appear in the first line
of the body of the reply.
_______________________________________________
mpls mailing list
mpls@lists.ietf.org
https://www1.ietf.org/mailman/listinfo/mpls
| |
|