The MPLS WG Archive

["Thomas D. Nadeau" <tnadeau@cisco.com>]

> Folks, 
> 
> Have you compiled this lately? 

	Apparently not. *)
 
> Import from MPLS-TC-MIB should be from MPLS-TC-STD-MIB 
	
	Yes, the MIB hasn't been updated for a while.
Need to do so shortly, as we want to wrap it up.
I have been swamped with a few other things, but
have it on my list.

	--Tom


> 
>  From smilint...
> frr.my:516: [1] {other} syntax error, unexpected COLON_COLON_EQUAL, 
> expecting OBJECT
> frr.my:521: [5] {} warning: flushing recent incorrect 
> declaration, see 
> previous error(s)
> frr.my:569: [1] {oid-registered} identifier `mplsFrrLogTable' 
> registers 
> object identifier already registered by `mplsFrrTunARHopTable'
> frr.my:495: [6] {} info: previous definition of `mplsFrrTunARHopTable'
> frr.my:581: [1] {oid-registered} identifier `mplsFrrLogEntry' 
> registers 
> object identifier already registered by `mplsFrrTunARHopEntry'
> frr.my:506: [6] {} info: previous definition of `mplsFrrTunARHopEntry'
> frr.my:588: [2] {basetype-not-imported} SMIv2 base type 
> `TimeTicks' must be 
> imported from SNMPv2-SMI
> frr.my:607: [1] {oid-registered} identifier 
> `mplsFrrLogEventTime' registers 
> object identifier already registered by `mplsFrrTunARHopProtectInUse'
> frr.my:532: [6] {} info: previous definition of 
> `mplsFrrTunARHopProtectInUse'
> frr.my:633: [2] {basetype-not-imported} SMIv2 base type 
> `TimeTicks' must be 
> imported from SNMPv2-SMI
> frr.my:818: [1] {other} syntax error, unexpected '}', expecting 
> UPPERCASE_IDENTIFIER or LOWERCASE_IDENTIFIER or NUMBER
> frr.my:818: [5] {} warning: flushing recent incorrect 
> declaration, see 
> previous error(s)
> frr.my:819: [1] {other} syntax error, unexpected COLON_COLON_EQUAL
> frr.my:819: [5] {} warning: flushing recent incorrect 
> declaration, see 
> previous error(s)
> frr.my:933: [2] {basetype-not-imported} SMIv2 base type 
> `Gauge32' must be 
> imported from SNMPv2-SMI
> frr.my:934: [2] {basetype-not-imported} SMIv2 base type 
> `Gauge32' must be 
> imported from SNMPv2-SMI
> frr.my:1001: [2] {basetype-not-imported} SMIv2 base type 
> `Gauge32' must be 
> imported from SNMPv2-SMI
> frr.my:1010: [2] {basetype-not-imported} SMIv2 base type 
> `Gauge32' must be 
> imported from SNMPv2-SMI
> frr.my:513: [1] {} unknown object identifier label 
> `mplsTunnelARHopEntry'
> frr.my:506: [2] {table-type} table's SEQUENCE OF type does 
> not match row 
> type
> frr.my:506: [5] {row-name-table-name} warning: row identifier 
> `mplsFrrTunARHopEntry' should have the same prefix as table 
> identifier 
> `mplsFrrLogTable'
> frr.my:506: [2] {augment-no-row} row `mplsFrrTunARHopEntry' 
> augments or 
> extends `mplsTunnelARHopEntry' which is not a row
> frr.my:530: [1] {} unknown object identifier label 
> `mplsFrrTunArHopEntry'
> frr.my:835: [1] {} unknown object identifier label 
> `mplsFrrDetourEntry'
> frr.my:1179: [1] {} unknown object identifier label 
> `mplsFrrConstExclAllAffinity'
> frr.my:446: [4] {group-membership} warning: node 
> `mplsFrrConstExclAnyAffinity' must be contained in at least 
> one conformance 
> group
> frr.my:496: [2] {} unknown type `MplsFrrTunARHopEntry'
> frr.my:10: [5] {import-unused} warning: identifier 
> `TEXTUAL-CONVENTION' 
> imported from module `SNMPv2-TC' is never used 
> 
> Cheers,
> Adrian
>