The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2003-May> msg00074



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Questions about draft-stokes-vkompella-ppvpn-hvpls-oam-01.txt

  • From: lidefeng <lidefeng@huawei.com>
  • Date: Tue, 20 May 2003 10:01:52 +0800
  • Cc: mpls@UU.NET, pwe3@ietf.org

Some questions about draft-stokes-vkompella-ppvpn-hvpls-oam-01.txt

In  8.1.1  Hierarchical L2 Circuit FEC Stack Sub-Type ,there are
"Encapsulation Type" field and " L2 specific Sub-TLV (Optional)" field  in
the proposed Hierarchical L2 Circuit,while,in the  "L2 specific Sub-TLV
(Optional)" field, there is "Type (0x000B)" field in it,I want to know
what's the difference between the "Encapsulation Type" in the Hierarchical
L2 Circuit and the "Type" in "L2 specific Sub-TLV (Optional)" ? If they are
both used,isn't one of them is redundant? Isn't reasonable use only one of
them?

The relevant format is copied to the following.

Hierarchical L2 Circuit:
       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       |                             VC ID                             |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       |      Encapsulation Type       |        Must Be Zero           |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       |                 L2 specific Sub-TLV (Optional)                |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

L2 specific Sub-TLV :
       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       |      Type (0x000B)            |            Length             |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       |                Target Ethernet MAC address                    |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       |                               |        802.1Q Tag             |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       |                Sender Ethernet MAC address                    |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       |                               |        802.1Q Tag             |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+