The MPLS WG Archive

["Wijnen, Bert (Bert)" <bwijnen@lucent.com>]

Since this was brought up as another WG MIB work item this
morning, here is what a very quick check reveals:

Need to import from MPLS-TC-STD-MIB instead of MPLS-TC-MIB

SMICng syntax checks:

  C:\bwijnen\smicng\work>smicng fastreroute.inc
  E: f(fastreroute.mi2), (1,1) SMI item "Gauge32" used 
     in MPLS-FRR-MIB, but not defined or imported
  E: f(fastreroute.mi2), (1,1) SMI item "TimeTicks" used 
     in MPLS-FRR-MIB, but not defined or imported
* E: f(fastreroute.mi2), (324,15) Index item 
     "mplsFrrConstTunnelInstance" must be defined with 
     syntax that includes a range
  E: f(fastreroute.mi2), (507,16) Index item "mplsFrrLogIndex"
     must be defined with syntax that includes a range
* E: f(fastreroute.mi2), (605,15) Index item 
     "mplsFrrOne2OnePlrTunInst" must be defined with syntax
     that includes a range
* E: f(fastreroute.mi2), (609,15) Index item
     "mplsFrrOne2OnePlrDetourInstance" must be defined with
     syntax that includes a range
* E: f(fastreroute.mi2), (763,15) Index item 
     "mplsFrrOne2OnePlrTunInst" must be defined with syntax
     that includes a range
* E: f(fastreroute.mi2), (887,16) Index item 
     "mplsFrrFacRouteBkupTunInst" must be defined with syntax
     that includes a range

Easy to fix I think.
The 5 errors marked with an * are similar to the ones I posted
this morning after my cjecking of LSR MIB. That is, they need
a range to be added to the TCs in the MPLS-TC-STD-MIB. SO they
will go away when that TC MIB is fixed.

There are quite a few other concerns I think that you can easily
identify if you check the document against 
   draft-ietf-ops-mib-review-guidelines-01.txt

Hope this helps as a start

Bert