The MPLS WG Archive

["Wijnen, Bert (Bert)" <bwijnen@lucent.com>]

I find the below. RFC-Editor can (and probably will)
fix that. But since it is in MIB module itself, there
is the risk of causing later syntax errors that we then
have to fix. So best to try and not exceed col 72 if 
another rev is done.

$ /bin/checkpage.awk < draft-ietf-mpls-ldp-mib-12.txt
Long line at 875 with 73 chars
Long line at 2639 with 73 chars
Long line at 2817 with 73 chars
Long line at 3683 with 75 chars
Long line at 3703 with 76 chars
Long line at 3704 with 73 chars
Long line at 3712 with 76 chars
Long line at 3718 with 78 chars
Long line at 3733 with 75 chars
Long line at 3745 with 78 chars
Long line at 3778 with 77 chars
Long line at 3779 with 76 chars
Long line at 3780 with 75 chars
Long line at 3781 with 77 chars
Long line at 3783 with 75 chars
Long line at 3785 with 73 chars
Long line at 3786 with 74 chars
Long line at 3787 with 73 chars
Long line at 3788 with 76 chars
Long line at 3789 with 75 chars
Long line at 3795 with 78 chars
Long line at 4604 with 76 chars
Long line at 4620 with 76 chars
Long line at 4625 with 78 chars
Long line at 4638 with 73 chars
Long line at 4639 with 75 chars
Long line at 4646 with 73 chars
Long line at 4652 with 78 chars
Long line at 4677 with 73 chars
Long line at 4678 with 78 chars
Long line at 4684 with 77 chars
Long line at 4685 with 73 chars
Long line at 4687 with 75 chars
Long line at 4688 with 74 chars
Long line at 4690 with 74 chars
Long line at 4692 with 76 chars
Long line at 4693 with 75 chars
Long line at 4694 with 76 chars
Long line at 4700 with 78 chars
Long line at 4860 with 78 chars
-: 40 lines longer than 72 characters, max 78

Thanks,
Bert