The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2003-Feb> msg00138



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

draft-kawakami-mpls-lsp-vlan-00.txt

  • From: Genadi Velev <velev@panasonic.de>
  • Date: Thu, 27 Feb 2003 17:53:01 +0100
  • Cc: vlan-mpls@panasonic.de
  • Importance: Normal

[ Mail was delivered through VPN PEL->MEI/AVCDC! ]
[ Mail was delivered through VPN PEL->MEI/AVCDC! ]
[ Mail was delivered through VPN PEL->MEI/AVCDC! ]
[ Mail was delivered through VPN PEL->MEI/AVCDC! ]

Hi all,

A new draft was published today (please see below).

Any feedback and comments are welcome, especially from those of you who are
dealing with packet transport over wide area Ethernet networks.

thanks,
Genadi

> -----Original Message-----
> From: owner-mpls@UU.NET [mailto:owner-mpls@UU.NET]On Behalf Of
> Internet-Drafts@ietf.org
> Sent: Thursday, February 27, 2003 1:44 PM
> To: IETF-Announce:
> Cc: mpls@UU.NET
> Subject: I-D ACTION:draft-kawakami-mpls-lsp-vlan-00.txt
>
>
> A New Internet-Draft is available from the on-line
> Internet-Drafts directories.
>
>
> 	Title		: Method to Setup LSP using VLAN Tag Switching
> 	Author(s)	: T. Kawakami et al.
> 	Filename	: draft-kawakami-mpls-lsp-vlan-00.txt
> 	Pages		: 15
> 	Date		: 2003-2-26
>
> This document describes a method to setup a Layer 2 tunnel over
> networks based on Ethernet technology. For this purpose, the ports of
> an Ethernet switch are configured to forward VLAN tag-labeled packets
> incoming from a certain port to another unambiguous port by using
> VLAN tag information. The Ethernet switches themselves are a part of
> the Label Switching Routers (LSRs), which distribute the VLAN tags
> using Label Distribution Protocol (LDP). To enable LDP to fulfil this
> function, an LDP extension is proposed. The introduced method
> simplifies the transport of Ethernet frames over wide area Ethernet
> networks.
>
> A URL for this Internet-Draft is:
> http://www.ietf.org/internet-drafts/draft-kawakami-mpls-lsp-vlan-00.txt
>
> To remove yourself from the IETF Announcement list, send a message to
> ietf-announce-request with the word unsubscribe in the body of
> the message.
>
> Internet-Drafts are also available by anonymous FTP. Login with
> the username
> "anonymous" and a password of your e-mail address. After logging in,
> type "cd internet-drafts" and then
> 	"get draft-kawakami-mpls-lsp-vlan-00.txt".
>
> A list of Internet-Drafts directories can be found in
> http://www.ietf.org/shadow.html
> or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
>
>
> Internet-Drafts can also be obtained by e-mail.
>
> Send a message to:
> 	mailserv@ietf.org.
> In the body type:
> 	"FILE /internet-drafts/draft-kawakami-mpls-lsp-vlan-00.txt".
>
> NOTE:	The mail server at ietf.org can return the document in
> 	MIME-encoded form by using the "mpack" utility.  To use this
> 	feature, insert the command "ENCODING mime" before the "FILE"
> 	command.  To decode the response(s), you will need "munpack" or
> 	a MIME-compliant mail reader.  Different MIME-compliant mail readers
> 	exhibit different behavior, especially when dealing with
> 	"multipart" MIME messages (i.e. documents which have been split
> 	up into multiple messages), so check your local documentation on
> 	how to manipulate these messages.
>
>
> Below is the data which will enable a MIME compliant mail reader
> implementation to automatically retrieve the ASCII version of the
> Internet-Draft.
>