The MPLS WG Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] Last call on LSP Ping
Shahram, They would need to be able to process Ping requests in order to support the trace-route capability, anyway. It is not so bad a thing to add this to the list of new features required to support continuity checks for a PLR. Eric W. Gray Systems Architect Celox Networks, Inc. egray@celoxnetworks.com 508 305 7214 > -----Original Message----- > From: Shahram Davari [mailto:Shahram_Davari@pmc-sierra.com] > Sent: Friday, December 13, 2002 2:47 PM > To: 'George Swallow'; curtis@fictitious.org > Cc: mpls@UU.NET > Subject: RE: Last call on LSP Ping > > Are you saying that now all LSRs (even the intermediate ones) > need to be able to generate and process MPLS-ping and keep > MPLS-ping states? > > -Shahram > > > -----Original Message----- > > From: George Swallow [mailto:swallow@cisco.com] > > Sent: Friday, December 13, 2002 2:22 PM > > To: curtis@fictitious.org > > Cc: Shahram Davari; mpls@UU.NET; swallow@cisco.com > > Subject: Re: Last call on LSP Ping > > > > > > > Currently you'd have to do that from each PLR. We don't provide a > > > means to tell the ingress of the existance of a detour (except the > > > local-protect-available bit in the signaling itself which one major > > > implementation wasn't using last I checked). We also don't > > provide a > > > means to tell a specific PLR to exercise its detour and report back. > > > > > > Let's wait and hear from Kireeti or other authors whether they think > > > anything should be added or whether the intent is to require testing > > > initiated at each PLR. > > > > The PLR is responsible for the bypass. It knows what sender-template > > it used, so it can form the proper FEC for the ping. It can send a > > lsp-ping with the proper label stack. So it is the natural place to > > do this. If it fails, it should > > > > a) report to network management > > b) reset the backup in place bit > > c) look for another way of establishing a backup > > d) if successful on c) set the backup in place bit. > > > > You may want to put a hold-down on b) to avoid reporting to the > > head-end on a transient situation. > > > > I don't see what advantage you would gain by moving all this to the > > head-end. I do see a lot of complications... > > > > ...George > > > > > > ================================================================== > > George Swallow Cisco Systems (978) 497-8143 > > 250 Apollo Drive > > Chelmsford, Ma 01824 > >
|
|