The MPLS WG Archive

[Internet-Drafts@ietf.org]

A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Multiprotocol Label Switching Working Group of the IETF.

	Title		: Generalized MPLS Signaling - RSVP-TE Extensions
	Author(s)	: L. Berger et al.
	Filename	: draft-ietf-mpls-generalized-rsvp-te-07.txt
	Pages		: 40
	Date		: 26-Apr-02
	
This document describes extensions to RSVP-TE signaling required to
support Generalized MPLS.  Generalized MPLS extends MPLS to encompass
time-division (e.g. SONET/SDH ADMs), wavelength (optical lambdas) and
spatial switching (e.g. incoming port or fiber to outgoing port or
fiber).  This document presents an RSVP-TE specific description of
the extensions.  A generic functional description and a CR-LDP
specific description can be found in separate documents.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-mpls-generalized-rsvp-te-07.txt

To remove yourself from the IETF Announcement list, send a message to 
ietf-announce-request with the word unsubscribe in the body of the message.

Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-mpls-generalized-rsvp-te-07.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-mpls-generalized-rsvp-te-07.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

<<< multipart/alternative: No recognizable part >>>