The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2001-Nov> msg00216



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

mapping of traffic to tunnels

  • From: Ajay Simha <asimha@cisco.com>
  • Date: Sun, 25 Nov 2001 19:25:58 -0500 (Eastern Standard Time)
  • cc: mpls@UU.NET
  • X-X-Sender: asimha@uzura.cisco.com

On Wed, 21 Nov 2001, Krishnakanth Rao wrote:


With all due respect.... this is NOT a Cisco alias so let us not waste
everyone else's time...

-ajay
KR>I have configured an MPLS tunnel in Cisco IOS using the following commands
KR>   interface tunnel1
KR>   ip unnumbered loopback 1
KR>   tunnel destination 1.1.1.1
KR>   tunnel mode mpls traffic-eng
KR>   tunnel mpls traffic-eng autoroute announce
KR>   tunnel mpls traffic-eng bandwidth 1000
KR>   tunnel mpls traffic-eng priority 1 1
KR>   tunnel mpls traffic-eng path-option 1 dynamic
KR>
KR>what is the command to map a traffic belonging to particular FEC(having
KR>a particular DSCP or having a particular address prefix) to this tunnel
KR>?
KR>
KR>

-- 
Ajay Simha
MPLS Deployment Engineer
IOS Technology Division
(919) 392-3141

"Study as if you were to live forever
 Live as if you were to die tomorrow"

 - Mahatma Gandhi