The MPLS WG Archive

[Arumugam R <arumugamr@future.futsoft.com>]

Hi,

While going through the LMP mib, some typo errors are found and i need 
some more clarification.

1. The lmpTeLinkAdminStatus in the lmpTeLinkTable is marked read-only, 
instead of read-create.

2. In the lmpTeLinkCCMappingTable, the lmpTeLinkCcMappingEntry is bound 
to have 4 entries as given in the example.

It should look like the following.

LmpTeLinkCcMappingEntry ::= SEQUENCE {
   lmpTeLinkId                                      TeLinkId,
   lmpCcId                                            LmpCcId,
   lmpTeLinkCcMappingRowStatus       RowStatus,
   lmpTeLinkCcMappingStorageType    StorageType
}
and appropriately the values and description needs to be changed.

3. In the lmpDateBearingLinkTable, the lmpDataLinkRemoteIfId is given as 
a read-only object.
The typo is in the example given, it is configured which gives a feeling 
that it is read-create. It needs to be removed from the example.

Can you through some explanation regarding the manual configuration 
procedure, since it can reduce some states and events in the TE Link 
FSM, as well as avoiding the test procedure & Data Link FSM, since it is 
not clearly explained in the LMP Draft. 

4. The lmpDataBearingLinkCcPreemptibility is mentioned as read-only 
instead of read-create. Also the description for the same is wrong & i 
feel it is a cut and paste from the description of lmpDataBearingType.

Suggestions are welcome

Thanks and regards
Arumugam R.