The MPLS WG Archive

["Adrian Farrel" <afarrel@movaz.com>]

Khuzema,

The TE MIB at transit nodes should (normally) be seen as read-only from an SNMP
point of view.  It is, therefore, updated by the protocol code.

Note that the exception is for 'static' LSPs where information about the LSPs
could be written to the TE MIB at transit nodes.

Adrian
--
Adrian Farrel
Movaz Networks Inc.
afarrel@movaz.com
----- Original Message -----
From: "Khuzema Pithewan" <KhuzemaP@netbrahma.com>
To: "'mpls@uu.net'" <mpls@UU.NET>
Sent: Friday, July 27, 2001 2:15 AM
Subject: mpls-te mib


> Hi,
>
> In case of rsvp-te as signaling mechanism in place, how mpls-te mib values
> are updated at LSRs?  Is it dyanamically updated on reception of path-resv
> messages or updated by SNMP/CLI?
>
> Regards
> Khuzema.
> ------------------------------------------------
> Net Brahma Technologies Private Limited
> Internext Networking Software
> A Microland Group Company
> 777, 3rd 'a' cross, 18th Main
> Koramangala VI th block
> Bangalore-95
> Phone no.s - (080) 5521451 / 5525011 / 5525012  Ext. 232
> Fax no        - (080) 5537233
> email : khuzemap@netbrahma.com
> www.netbrahma.com
>