The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2001-Feb> msg00122



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Draft IETF MPLS TE MIB 05: Tunnel Table indexes

  • From: "Thomas D. Nadeau" <tnadeau@cisco.com>
  • Date: Wed, 14 Feb 2001 07:47:28 -0500


         Dave,

>Hopefully this is a simple question. The Tunnel Table has 4 indexes, 2
>of which are the LSR IDs. My question is: what should the egress LSR ID
>be within the node that terminates the tunnel (0? the local LSR ID?).
>Conversely, what should the ingress LSR ID be within the node that
>originates a tunnel?

         The egress tun id should be the end of the tunnel
(i.e.: terminating LSR ID), and the ingress LSR ID should
be the beginning of the tunnel. The descriptions are very
clear about where you should get these values depending
on which signaling protocol you are using.

         --Tom