The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2001-Aug> msg00390



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

LSP ID in LSR MIB

  • From: "Neelesh Dwivedi" <neelesh@mercurykr.com>
  • Date: Wed, 29 Aug 2001 09:55:16 +0530
  • Cc: <cheenu@alphion.com>
  • Organization: Mercury Corporation

Hello,
I have  few doubts related to the MPLS LSR MIB
(draft-ietf-mpls-lsr-mib-07.txt).

The Cross-Connect Table has an entry

       mplsXCLspId                 MplsLSPID

 This MplsLSPID is described in  draft-ietf-mpls-tc-mib-02.txt as

 "An identifier that is assigned to each LSP and is used to uniquely
identify
it.  This is assigned at the head end of the LSP and can be used by all LSRs
to identify this LSP.  This value is piggybacked by the signaling protocol
when this LSP is signaled within the network.  This identifier can then be
used at each LSR to identify which labels are being swapped to other
labels for this LSP.  For IPv4 addresses this results in a 6-octet long
cookie."
SYNTAX        OCTET STRING (SIZE (0..31))

 My questions are:
a)  Is there any standard format for this unique identifier ? If not, then
what can be the possible ways to assign it?

 b) What do we mean by "piggybacking" this value by the signaling protocol?
If it is to be advertised in some control message then where and how do
we do it?

 Regards,
Neelesh.

 Mercury Corporation
New Delhi R&D Centre,
Gurgaon, India.