The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2001-Aug> msg00195



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

How to know that egress router is reached?

  • From: David Charlap <david.charlap@marconi.com>
  • Date: Mon, 20 Aug 2001 11:08:19 -0400

Hongwei wrote:
> 
> In LSP set up, how to know that the egress router has been reached
> and the label mapping process should begin then?

There are only two possible ways:

1: The FEC describes an address or address range that the router is
   directly connected to.

2: The next-hop to the FEC is not an LDP peer.

-- David