The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2000-Oct> msg00419



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Doubts in "draft-ietf-mpls-lsp-query-00.txt"

  • From: "Manikantan S" <manis@future.futsoft.com>
  • Date: Wed, 25 Oct 2000 15:50:49 +0530
  • Cc: <mpls@UU.NET>
  • Importance: Normal

Hello Paraschiv

I read the draft "draft-ietf-mpls-lsp-query-00.txt".

I have a few doubts and can you please clarify them?

Thanks.

1) Label TLV is used in the Query message and the Query Label
   TLV as Optional parameters in the Query Reply message.
   Both the TLVs contain a set of Generalized Label TLVs.
   I am not clear as why do we require Query Label TLV and
   Label TLV i.e., two TLVs when the contents are the same?

2) ER TLV has been specified as Optional parameters in
   Query Message and in Query-reply message. I understand
   that this TLV's usage is to keep track of the hops.
   Path Vector TLV (in LDP), RRO in (RSVP-TE)helps in
   providing this information too. What is the significance
   of using ER TLV?

3) In Section 5.2 Page 9, we have
   --------------------------------------------------------------------
   Upon receiving a Query Message, an LSR decodes the label to identify
   which LSP is queried. If it cannot find the LSP which is using the
   label, it sends back a Notification message.
   --------------------------------------------------------------------
   What is the status value that should be indicated in this case?

4) In Section 6.2 Page 12, we have
   -------------------------------------------------------------------
   A Query-Reply message is initiated by an egress node which receives a
   Query message, if the egress is able to identify the queried LSP.  If
   not, the egress replies with a Notification message.
   --------------------------------------------------------------------
   What is the status value that should be indicated in this case?
   Should this be the same one as for question 3?


I noticed Following minor typos/missing info

1) Section 6.3 Page 13
   we have
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |0|    Query-Reply (0x0411)     |      Message Length           |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

  should be
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |0| Partial-Query-Reply (0x0411)|      Message Length           |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

2) Section 7.2 Page 16
   for "The format for the Query Label TLV " read "The format for the Merge
Flags TLV"

3) Section 7.3 Page 16
   for "The format for the Query Label TLV " read "The format for the Label
TLV"


Thanks in advance
with best regards
mani
-----------------------------------------
S.Manikantan
Future Software Limited
480-481, Anna Salai,
Nandanam, Chennai, India.
Zip (PIN CODE) : 600 035
Phone          : 91-44-4330550
Fax            : 91-44-4344157
email          : manis@future.futsoft.com
-----------------------------------------