The MPLS WG Archive

[Francois Le Faucheur <flefauch@cisco.com>]

Hello,

Note that <draft-ietf-mpls-diff-te-reqts-00.txt> as well as
<draft-ietf-mpls-diff-te-reqts-00.txt> incorrectly refer to
<draft-lefaucheur-diff-te-ospf-01.txt> and to
<draft-lefaucheur-diff-te-isis-01.txt>. Those do NOT exist (yet). They
should actually refer to <draft-lefaucheur-diff-te-ospf-00.txt> and to
<draft-lefaucheur-diff-te-isis-00.txt>.
Sorry about this.
Francois

>To: IETF-Announce: ;
>Cc: mpls@uu.net
>From: Internet-Drafts@ietf.org
>Reply-to: Internet-Drafts@ietf.org
>Subject: I-D ACTION:draft-ietf-mpls-diff-te-reqts-00.txt
>Date: Fri, 24 Nov 2000 18:12:11 -0500
>Sender: scoya@cnri.reston.va.us
>
>A New Internet-Draft is available from the on-line Internet-Drafts
directories.
>This draft is a work item of the Multiprotocol Label Switching Working
Group of the IETF.
>
>	Title		: Requirements for support of Diff-Serv-aware MPLS 
>                          Traffic Engineering
>	Author(s)	: F. Le Faucheur et al.
>	Filename	: draft-ietf-mpls-diff-te-reqts-00.txt
>	Pages		: 13
>	Date		: 22-Nov-00
>	
>This document defines the requirements for support of Diff-Serv-
>aware MPLS Traffic Engineering on a per-Class-Type basis, as
>discussed in the Traffic Engineering Working Group Framework
>document [TEWG-FW].
>
>A URL for this Internet-Draft is:
>http://www.ietf.org/internet-drafts/draft-ietf-mpls-diff-te-reqts-00.txt
>
>Internet-Drafts are also available by anonymous FTP. Login with the username
>"anonymous" and a password of your e-mail address. After logging in,
>type "cd internet-drafts" and then
>	"get draft-ietf-mpls-diff-te-reqts-00.txt".
>
>A list of Internet-Drafts directories can be found in
>http://www.ietf.org/shadow.html 
>or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
>
>
>Internet-Drafts can also be obtained by e-mail.
>
>Send a message to:
>	mailserv@ietf.org.
>In the body type:
>	"FILE /internet-drafts/draft-ietf-mpls-diff-te-reqts-00.txt".
>	
>NOTE:	The mail server at ietf.org can return the document in
>	MIME-encoded form by using the "mpack" utility.  To use this
>	feature, insert the command "ENCODING mime" before the "FILE"
>	command.  To decode the response(s), you will need "munpack" or
>	a MIME-compliant mail reader.  Different MIME-compliant mail readers
>	exhibit different behavior, especially when dealing with
>	"multipart" MIME messages (i.e. documents which have been split
>	up into multiple messages), so check your local documentation on
>	how to manipulate these messages.
>		
>		
>Below is the data which will enable a MIME compliant mail reader
>implementation to automatically retrieve the ASCII version of the
>Internet-Draft.
>Content-Type: text/plain
>Content-ID:	<20001122150102.I-D@ietf.org>
>
>ENCODING mime
>FILE /internet-drafts/draft-ietf-mpls-diff-te-reqts-00.txt
>
><ftp://ftp.ietf.org/internet-drafts/draft-ietf-mpls-diff-te-reqts-00.txt>
>