The MPLS WG Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] DIFFSERV object
Eleonora, With RSVP-TE, a lot of the Tunnel properties are selected by the Head-End and only signaled in the Path message. This is the case for the SESSION_ATTRIBUTE (eg. setup and hold priorities) and for the EXPLICIT_ROUTE. It also makes sense that the Diff-Serv requirements for the tunnel be selected by the Head-end and signaled in the Path message. Francois At 19:05 24/11/2000 +0100, Eleonora Manconi (TEI) wrote: >Hi all, >I'm studing a possible extension of RSVP for MPLS. I have a question about draft-ietf-mpls-diff-ext-0.7.txt again: >why the DIFFSERV object is added to the Path message ?(I mean is it the same if the DIFFSERV object is transported by the Resv message in the <FF flow descriptor list>? ) > >Thanks in advance. > >/Eleonora > _________________________________________________________________ Francois Le Faucheur Development Engineer, IOS Layer 3 Services Cisco Systems Office Phone: +33 4 92 96 75 64 Home Office Phone: +33 4 92 94 00 78 Mobile : +33 6 89 108 159 Vmail: +33 1 58 04 62 66 Fax: +33 4 92 96 79 08 Email: flefauch@cisco.com _________________________________________________________________ Petra B - Les Lucioles - 291, rue Albert Caquot - 06560 Valbonne - France _________________________________________________________________
|
|