The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2000-Jun> msg00561



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Need for RRO Object in the Error Mesg.

  • From: George Swallow <swallow@cisco.com>
  • Date: Thu, 29 Jun 2000 15:41:20 -0400
  • cc: mpls@UU.NET, swallow@cisco.com

> arumugamr@future.futsoft.com said:
> > This message is regarding to the need of RRO object in the PathErr
> > message  & ResvErr Mesg if the size of the RRO exceeds the Maximum
> > MTU. Is it not enough to send the error message alone to the Ingress
> > of the  tunnel to get it removed? 
> 
> I also don't see much value in including the RRO object in the
> error message and think this requirement should be removed from
> the spec.
> In addition, this part of the spec conflicts with section 3 and
> section 4.4 of the same spec (draft-ietf-mpls-rsvp-lsp-tunnel-05)
> which say that an RRO is only included in Path and Resv messages.
> 
> Markus

Seems that a number of folks would like to see this disappear.  Does
anyone want to argue for keeping it?  If not I'll remove it from the
next rev (which will be out before the cut-off).

...George

==================================================================
George Swallow       Cisco Systems                   (978) 244-8143
                     250 Apollo Drive
                     Chelmsford, Ma 01824