The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2000-Jun> msg00498



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

LSP hierarchy with MPLS TE

  • From: "James R. Leu" <jleu@laurelnetworks.com>
  • Date: Mon, 26 Jun 2000 10:43:16 -0400
  • Organization: Laurel Networks

On Thu, Jun 22, 2000 at 11:05:43AM -0400, George Swallow wrote:
> Folks,
> 
> Yakov and Kireeti have requested that draft-kompella-lsp-hierarchy-00.txt
> be accepted as a work group document.  So far I've only seen support.
> If there are no objects by 6/27, we'll declare it so.

Maybe this isn't a significant issues, but:

In section "4.1.2. Link ID (OSPF only)" it states:

   The Link ID is set to the Router ID of the head end of FA-LSP.

Doesn't this conflict with RFC2328 Section 12.4.1.  Router-LSAs:

     Link type   Description       Link ID
     __________________________________________________
     1           Point-to-point    Neighbor Router ID
                 link

How does the above affect the following (from RFC2328 Section 12.4.1
as well)?

   In addition, the Link Data field is specified for each link.
   For ... numbered point-to-point links ... this field specifies
   the IP interface address of the associated router interface.
   ...
   For unnumbered point-to-point links, the Link Data field should
   be set to the unnumbered interface's MIB-II [Ref8] ifIndex value.

Jim  
-- 
James R. Leu
Software Engineer
Laurel Networks, Inc
jleu@laurelnetworks.com