The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2000-Aug> msg00112



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

LDP Specification

  • From: Bob Thomas <rhthomas@cisco.com>
  • Date: Thu, 10 Aug 2000 06:57:41 -0400
  • cc: mpls@UU.NET

Lichung,

>     In http://search.ietf.org/internet-drafts/draft-ietf-mpls-ldp-09.txt
> section 3.5.1.2.2. Unknown or Malformed TLV  shows that:
> 
> > If the TLV type is >= 0x8000 (high order bit 1) the TLV is
> > silently dropped.  Section "Unknown TLV in Known Message Type"
> > elaborates on this behavior.
> 
>     Where can I find the section "Unknown TLV in Known Message Type"?
> Thanks in advance for your clarification.

There is no such section.  This error goes back at least as far
as draft-ietf-mpls-ldp-02.txt.

The behavior in question is best described in Section 3.3
(Type-Length-Value Encoding).

Thanks for pointing this out.


Bob