The MPLS WG Archive

Cell Relay Retreat>MPLS WG Archive>month:2000-Aug> msg00106



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Fwd: RSVP-LSP-TUNNEL

  • From: Lou Berger <lberger@labn.net>
  • Date: Wed, 09 Aug 2000 11:04:38 -0400
  • Cc: Lou Berger <lberger@labn.net>, mpls@UU.NET, swallow@cisco.com

It's been fixed.

See: http://www.isi.edu/in-notes/iana/assignments/rsvp-parameters

Thanks again for catching this.

Lou

At 10:32 AM 8/9/00 -0400, Markus Jork wrote:
>Lou,
>
>the IANA assignments seem to be based on draft-ietf-mpls-rsvp-lsp-tunnel-05:
>
> > >The following defines error values for the Routing Problem Error
> > Code:
> >       Value Error:
> >       1     Bad EXPLICIT_ROUTE object
> >       2     Bad strict node
> >       3     Bad loose node
> >       4     Bad initial subobject
> >       5     No route available toward destination
> >       6     RRO syntax error detected
> >       7     RRO indicated routing loops
> >       8     MPLS being negotiated, but a non-RSVP-capable router
> >             stands in the path
> >       9     MPLS label allocation failure
> >       10    Unsupported L3PID
>
>But draft-ietf-mpls-rsvp-lsp-tunnel-06 redefines error value 6:
>
> >       6     Unacceptable label value
>
>How will this be resolved?
>
>Markus