The MPLS WG Archive

["Mancour, Tim" <timm@tenornetworks.com>]

Tom,

Everything looks good, I have just a few typographical comments:

      1) The syntax for mplsXCIndex is Integer32(0..2147483647), it
         should be Integer32(1..2147483647).

      2) In the descriptions of both mplsInterfaceTotalBandwidth and
         mplsInterfaceAvailableBandwidth, it says "kilobits per second
         (Kbps/sec)". It should be "kilobits per second (Kbps)".

      3) In the descriptions of both mplsTrafficParamMaxRate and
         mplsTrafficParamMeanRate it says "rate in bits/second". It
         should be "rate in kilobits/second".
  
      4) The syntax for mplsInSegmentNPop is Integer32(1..2147483647).
         Zero should be a valid value. Also, it was previously agreed 
         that INTEGER(0..255) was a better syntax for this object.

      5) For consistency, mplsMaxLabelStackDepth should also have a 
         syntax of INTEGER(1..255).

Thanks.
TimM   

-----Original Message-----
From: Thomas D. Nadeau [mailto:tnadeau@cisco.com]
Sent: Friday, April 21, 2000 2:41 PM
To: mpls@UU.NET
Cc: cheenu Srinivasan; arun Viswanathan
Subject: draft-ietf-mpls-lsr-mib-03.txt published



	Hi,

	We have published version -03 of the MPLS LSR
MIB. The modifications which appear in this version
were made as a result of the MPLS WG Last Call period
which took place a few weeks ago.

	In the time before this draft appears on the
MPLS web site, it can be found anonymously at:

ftp://anonymous@ftp-eng.cisco.com/tnadeau/draft-ietf-mpls-lsr-mib-03.txt

	--Tom